Access Plates Installation

We use SeaBuilt Access Plates

Access is the most important aspect in every tank cleaning. When there is limited fuel tank access, Dr. Fuel Clean can provide and/or install an access or inspection plate to allow for quick and easy Diesel Fuel Servicing.

Easy installation allows repeated access. Isolation from tank eliminates electrolysis problems. External and internal gaskets means no messy gasket compound required!

Compatible with many Diesel Tank materials including: Aluminum, Carbon Steel, Iron, Stainless Steel, Monel, Fiberglass, and Poly.

Access Plate Specs:


Access plate made from 6061-T6 Aluminum -or- 304 Polished Stainless Steel (Water/Holding/Diesel Only). Gasket made from 3/32 70-D Buna-N. All fasteners stainless steel.

Available Sizes:

  • 6″ Access Plate System (with 4″ cutout)
  • 8″ Access Plate System (with 6″ cutout)
  • 10″ Access Plate System (with 8″ cutout)
  • 14″ Access Plate System (with 12″ cutout)
  • 21″ Access Plate System (with 18″ cutout)

Note: Never install the Access Plate System on tanks containing gasoline or other highly flammable liquids or gasses.

Installation Examples:

Marine Tank Access Plates installed by Dr. Fuel Clean on each side of baffle.

Installed on side of Marine Diesel Plate

Thanks for getting our 1979 Hatteras up and running again. I thought from the problems that we were having, that all the fuel needed to be removed. We have run our boat now for over 220 hours with no filter replacements... (continue)

© Dr. Fuel Clean Inc. All Rights Reserved - Wordpress Website Design by Swank